ProVantage ATV Plow Mount Kit
Front Mounting Kit
Features Rapid connect system for easy mounting and removal
No need to crawl under ATV, or to remove during off-season
No reduction in ground clearance
Requires Base Tube Assembly part number WAR92100
Requires Plow blade kit part number WAR78950,WAR78954,WAR78960 (straight blades) or WAR80954,WAR80960 (tapered blades)
Requires Warn ATV Winch as a plow lifting mechanism, or Plow Lift Linear Actuator part number WAR79630
1. If necessary, remove winch and winch plate. Remove winch hook so winch can be removed without the need to remove roller fairlead and front skid plate.
2. Remove stock M10 fasteners that connect the aluminum frame rails to the main body frame . Keep the stock OE flange nuts, they will be used to bolt on the front plow mount to the ATV in the next step.
3. Slide plow mount into place from the side opening of ATV . The plow mount should sit behind the front frame rail flanges.
4. Using the provided M10 bolts (B5), rebolt the frames and bottom of the plow mount together. Use the existing stock OE flange nuts from step 2. Do not tighten completely.
5. Using the 30mm M8 bolts (B1), washers (B2), spacers (B3) and M8 flange head nuts (B4), continue to connect the mount to the frame rail flanges.
6. Go back and securely tighten all four bolts from steps 4 and 5 referring to the recommend torque guidelines. If no winch installation necessary please skip to step 9.
7. Slide winch through the side opening the same way the plow mount was put into place. Allow extra slack in the winch rope to feed it through the back of the roller fairlead . Let the winch rest on top of the plow mount. NOTE: Please see the WARN winch installation instructions to install the roller fairlead.
8. Bolt the winch onto plow mount using the provided bolts in the WARN winch kit. Tighten bolts to recommended torque guidelines.
9. Place clamp around the back of the main frame bar and bolt onto the plow mount . Tighten bolts to recommended torque guidelines. If no winch installation necessary skip to step 11.
10. See WARN winch kit installation instructions for wiring and terminal connection to winch.
11. To attach the plow to the ATV align plow push tubes with plow mount tabs. Lift plow push tubes and set the pucks into the cradles of the plow mount. Push pin (C1) through the mount and push tube assembly and lock the pin’s retaining clip onto the tabs.