Delivery info

From then, delivery is generally is the same day / 2 days (depending on your location). Cut off time 2 PM PST.

30 days returns

Not the right fit? No worries.

AEM For 89-94 240SX 91-94 Sentra 91-93 NX/NX2000 90-94 Pulsar GTi-R Series 2 EMS

AEM For 89-94 240SX 91-94 Sentra 91-93 NX/NX2000 90-94 Pulsar GTi-R Series 2 EMS

Not for sale or street use in CA & CARB states.

Series 2 Plug & Play Engine Management System (30-6600) by AEM®. Includes 72" Serial EMS Communication Cable. Get complete control of your car’s engine and driveline using the vehicle’s factory wiring and sensors with the Series 2 Plug and Play Engine Management System. It plugs right into your car’s factory ECU harness and requires no additional wiring or hardware. The Series 2 EMS contains AEMTuner Windows-compatible software that is infinitely adjustable, allowing you to tune your engine by programming virtually any combination of engine control, power adders, and auxiliary devices, and accurately deliver the proper amounts of fuel and correct ignition timing for any boost level or operating condition. Laptop tunable via USB or serial connection, 6’ serial cable and 10’ USB cable included.

Features:

Delivers complete control of your car’s engine and driveline

Plugs into your car’s factory wiring harness and uses existing sensors

Runs on Windows compatible software

Included AEMTuner software simplifies tuning process

Includes USB and serial port for tuning via laptop or PC with included 10’ USB cable and 6’ serial cable

Includes start-up calibrations

Systems are unlocked and fully enabled – never pay for upgrades

Works with all AEM gauges and communicates with AEMnet enabled electronics

Internal data logger with 2MB memory

Logging software for data analysis

Comes with detailed instructions

Limited 1-year warranty

AEM makes it easy to hot-rod your modern fuel-injected, computer-controlled car. Instead of installing performance parts like bigger injectors and nitrous oxide and trying to make them work by modifying the harness, sensors, or adding modules, just install AEM’s Series 2 Plug and Play EMS and you’ll have complete control of your engine and driveline. The Series 2 EMS allows you to control every aspect of your engine, including variable valve timing, RPM limit, timing, adding larger injectors, boost control, nitrous injection, even anti-lag and individual cylinder fuel and timing trims. And it does this using your vehicle’s factory wiring harness and existing sensors. The Series 2 EMS is a real plug and play unit; it connects directly into your vehicle’s factory ECU harness and requires no additional wiring or hardware. It comes loaded with AEM’s Windows compatible AEMTuner software, which simplifies copying, viewing, and data manipulation. Just connect your laptop or PC to the Series 2 EMS with the included 10’ USB cable or 6’ serial cable, and start tuning.

The Series 2 EMS can accommodate 3 trigger inputs (Ref/Sync), up to 12 analog voltage inputs, up to 6 analog temperature inputs, up to 8 switch inputs, 2 Lambda inputs, and 2 knock sensor inputs. It has an internal barometric pressure sensor, and a user adjustable knock sensor center frequency. It’s capable of up to 12 injector outputs, up to 8 ignition outputs, up to 12 general purpose low side outputs, up to 4 general purpose high side outputs, and individual cylinder ignition and fuel trims.

Functions and features include groundspeed based boost target, staged nitrous injection, ground speed limiting, overrun boost enhancement (anti-lag), gear change ignition cut (shift without lift), stepper motor idle control, continuously variable cam control for 4 cams, main relay control, VTEC control, fuel and ignition rev limiters, “in-cockpit” global fuel trim capability, and gear dependent shift light.

Start-up calibrations are included to get you headed in the right direction. The AEMTuner software has colored tables and maps, includes a support pane to give you context sensitive help, and uses tuners’ actual calibrations to describe each function. You can graphically compare tables and maps for easy analysis, and internal conflict detection will alert you if obvious errors exist in the assignment of inputs/outputs. The included AEM data analysis software features advanced 3D graphics, and allows you to review and playback vehicle, driver, or engine data and overlay this data using charts, dash displays, gauges, or custom displays that you create. Maps can be password protected to prevent unauthorized usage or sharing.

THIS PRODUCT MAY BE USED SOLELY ON VEHICLES USED IN SANCTIONED COMPETITION WHICH MAY NEVER BE USED UPON A PUBLIC ROAD OR HIGHWAY, UNLESS PERMITTED BY SPECIFIC REGULATORY EXEMPTION (

IT IS THE RESPONSIBILITY OF THE INSTALLER AND/OR USER OF THIS PRODUCT TO ENSURE THAT IT IS USED IN COMPLIANCE WITH ALL APPLICABLE LAWS AND REGULATIONS. IF THIS PRODUCT WAS PURCHASED IN ERROR, DO NOT INSTALL AND/OR USE IT. THE PURCHASER MUST ARRANGE TO RETURN THE PRODUCT(S) FOR A FULL REFUND.

THIS POLICY ONLY APPLIES TO INSTALLERS AND/OR USERS WHO ARE LOCATED IN THE UNITED STATES, HOWEVER CUSTOMERS WHO RESIDE IN OTHER COUNTRIES SHOULD ACT IN ACCORDANCE WITH THEIR LOCAL LAWS AND REGULATIONS

Upsell products

 

img

Added to cart successfully!