Delivery info

From then, delivery is generally is the same day / 2 days (depending on your location). Cut off time 2 PM PST.

30 days returns

Not the right fit? No worries.

Warn 30 SPLine Premium Manual Locking Hubs For Land Cruiser&Pickup 76-87 - 28771

Warn 30 SPLine Premium Manual Locking Hubs For Land Cruiser&Pickup 76-87 - 28771

BRAND NEW ITEM IN ORIGINAL PACKAGE
 
Premium Manual Locking Hub Kit by WARN. The Warn Premium Hub is a no-compromise hub designed for the hardcore off-roader or truck owner who will accept nothing less than the industry standard in performance. The all metal construction and ZA Alloy dial ensure years of reliable functioning. This dial requires a full 9/10ths of a turn to ensure positive engagement of the inner drive gear to the clutch ring. To make sure they stay engaged, WARN premium hubs use a thick internal wave spring and heavy dial detents.
 
The Warn premium Hub is a no compromise hub designed for the hardcore off roader or truck owner who will accept nothing less than the industry standard in performance. The all metal construction and ZA Alloy dial ensure years of reliable functioning. This dial requires a full 9/10ths of a turn to ensure positive engagement of the inner drive gear to the clutch ring. To make sure they stay engaged, Warn premium hubs use a thick internal wave spring and heavy dial detents. We know our premium hubs will be used hard, so we build them to last.
 
Heavy Detents For Positive Engagement
Wave Spring Technology Increases Reliability Over Standard Coil Springs
All Metal Construction
ZA Alloy Dial With Dual Seals Keep Contaminants Out
Limited Lifetime Warranty
 
Features
 
9/10 turn dial for robust engagement/disengagement
 
Heavy detents for positive engagement
 
Wave spring technology increases reliability over standard coil springs
 
All metal construction
 
ZA Alloy dial with dual seals keep contaminants out
 
Heavy dial detents
 
Lifetime limited warranty
 
Installations:
 
1. Separate cap assembly from body assembly.
 
2. Install O-ring and body assembly on wheel end.
 
3. Install washers and bolts per charts below.
 
4. If axle shaft extends beyond the inner drive gear, install retaining ring onto the axle shaft. TOYOTA ONLY (1976-1985): if axle shaft does
not extend beyond the inner drive gear, install stop plug and hex bolt (provided) in axle shaft and torque to 10-12 ft. lb.
 
5. TOYOTA (86 - Present)/GEO/SUZUKI: If capscrew and spacer were previously removed, reinstall them to the axle shaft and torque to 10-12 ft. lb.
 
6. Properly align cap gasket on cap assembly . Place cap assembly on body assembly. Align guide pin in cap to relief in body. Install and tighten the socket head cap screws to 45-50 in. lb.
 
7. TO CHECK FOR PROPER ENGAGEMENT, dial both hubs to LOCK and raise the front left corner of the vehicle off the ground. Spin
the lifted tire. The drive line will turn if the hub is engaging properly. 

Upsell products

$150.00
Rated 5.00 out of 5
( 1 review )
$150.00
Rated 5.00 out of 5
( 1 review )
$150.00
Rated 5.00 out of 5
( 1 review )
$150.00
Rated 5.00 out of 5
( 1 review )
$150.00
Rated 5.00 out of 5
( 1 review )
$150.00
Rated 5.00 out of 5
( 1 review )
$150.00
Rated 5.00 out of 5
( 1 review )
$150.00
Rated 5.00 out of 5
( 1 review )

 

img

Added to cart successfully!